ERON
MAGNETIC HEIGHT BLOCKS WITH SENSOR
Material Medium Carbon Steel (S45C)
Feature
- Magnetic force being passed through workpiece can be checked.
- Magnetic force is changeable depend on material and conditions of workpieces. (e.g. SS400:4 level FC250: 2 level)
- Magnetic force can be showed with 4 stages when being connected. To NMC-200, which is reference of adsorption force for overall of workpiece.[Accessories]Mounting Bolts, Connection Cable (3m)
| Display 4bit LED | Magnetic Level | ||||
| 1 | 2 | 3 | Four | ||
| 0%–10% | No suction power | ||||
| Lighting | 10% to 25% | ||||
| Lighting | Lighting | 25% to 50% | Example: FC250 polished surface | ||
| Lighting | Lighting | Lighting | 50% to 80% | ||
| Lighting | Lighting | Lighting | Lighting | 80% to 100% | Example: SS400 polished surface |
- The magnetic level of the magnetic sensor indicates the adhesive force per unit area.
- Please use this as a guide for the adhesive force of the entire workpiece, taking into consideration the number of magnetic poles in contact with the workpiece.
- Even if the magnetic level is low, if the number of magnetic poles in contact with the workpiece is large, the adhesive force of the entire workpiece will be large.
- If the adhesive force is greater than the cutting thrust, processing is possible.
