ERON
MC TOOLING BLOCKS (2 FACES/STANDARD T-SLOT TYPE)
Material: FC25
Heat treatment: Annealing
Surface treatment: Painting (Cast Surface)
Feature
- Type with T-slots and U-slots in addition to the standard specifications.
- .4-.5mm of self-cut allowance is included on the used surface.
- The same accuracy as the machine you are using is possible from the self-cut.
- Bottom and 2 adjacent edge locator surfaces can be ground finish, and top surface of base plate can be machined finish as options.
【Accessories】Top Plates, Set Screws for Top Plate, Eye Bolts
* Custom-made products to suit your specifications are also available.
SPECIFICATIONS
No. | Base | Overall height | Width ofcolumn | Mounting HoleDiameter | Number ofMountingHoles | Weight (Kg) |
TGV04S-15035 | 400 | 350 | 150.8 | φ18 | 4 | 141 |
TGV04S-20045 | 400 | 450 | 200.8 | φ18 | 4 | 189 |
TGV04S-25050 | 400 | 500 | 250.8 | φ18 | 4 | 227 |
TGV04S-15060 | 400 | 600 | 150.8 | φ18 | 4 | 219 |
TGV05S-20050 | 500 | 500 | 200.8 | φ18 | 4 | 265 |
TGV05S-25055 | 500 | 550 | 250.8 | φ18 | 4 | 308 |
TGV05S-22060 | 500 | 600 | 220.8 | φ18 | 4 | 316 |
TGV05S-25070 | 500 | 700 | 251 | φ18 | 4 | 376 |
TGV06S-20060 | 630 | 600 | 200.8 | φ18 | 6 | 411 |
TGV06S-25070 | 630 | 700 | 251 | φ18 | 6 | 490 |
TGV06S-30070 | 630 | 700 | 301 | φ18 | 6 | 518 |
TGV06S-25080 | 630 | 800 | 251 | φ18 | 6 | 547 |
TGV08S-30080 | 800 | 800 | 301 | φ18 | 6 | 740 |
TGV08S-40080 | 800 | 800 | 7401 | φ18 | 6 | 793 |
TGV08S-50090 | 800 | 900 | 501 | φ18 | 6 | 951 |
TGV10S-40070 | 1000 | 700 | 401 | φ22 | 6 | 1155 |
TGV10S-30080 | 1000 | 800 | 301 | φ22 | 6 | 1184 |
Optional Ground Finish and Machined Finish
№ | K | L |
---|---|---|
□400 | 0.01/500 | 0.01/300 |
□500 | 0.01/500 | 0.01/300 |
□630 | 0.01/500 | 0.01/300 |
□800 | 0.01/500 | 0.01/300 |
□1000 | 0.01/500 | 0.01/300 |