Material
- Cap : Medium carbon steel(S45C)
- Connector Cap : C3604(Brass rod)
Functions
- After air injections by air blowing gun, un-clamping conditions of Q-lock elements can be kept for a while.
- After inserting cap into valve body, air can be exhausted,and Q-lock elements become clamping conditions.
Notes
- Tip of air blowing gun must be taper type or rubber coating ones.(less leakage compared with metal one, and less damage on resin.)
- Air tubes can not be used.
- O.05MPa of pressure loss must be considered.
Usage
 |
 |
 |
| Exchanged jigs must be set on fixed plates. |
Cap must be inserted into valve body for air exhaust which led to clamping. |
Taking cap off, and injecting air into body, then getting nclamping |
