OSG

Exchangeable Head End Mill – PXM

The PXM is an exchangeable head end mill series with the same high performance of a solid tool and the cost efficiency of an indexable tool. A single exchangeable head body is able to accommodate a wide range of exchangeable heads to meet various application needs.

Categories: ,

  • Offers performance advantage of both solid and indexable tools.
  • A single shank holder to accommodate a wide variety of exchangeable heads.
  • Comprehensive exchangeable head lineup for various applications.
  • Prevents clogging of chips by using coolant or air through the internal oil hole. Improves chip evacuation.
  • The outer diameter of the large flute type is larger than the shank neck diameter, making it highly effective in processing of die and mold applications that require vertical wall milling or pocketing.
  • Collet for PXM (PXMC) : Enables ultra efficiency even on small machining center.
Applications
Mild Steel・Carbon Steel・Cast Iron・Alloy Steel・Tool Steel・Stainless Steel・Hardened Steel・Titanium Alloy・Superalloy・Inconel®・Pre-hardened Steel, etc. Lineup
 Head
PXSE Unequal Spacing, Four Flutes, Square・Corner Radius Type
  • without Coolant Hole φ10～φ25
  • with Coolant Hole φ12～φ25
PXVC Variable Lead, Four Flutes, High Helix, Square・Corner Radius Type
  • without Coolant Hole φ10～φ32
PXSM Unequal Spacing, Multiple Flutes, Square・Corner Radius Type
  • without Coolant Hole φ10～φ25
PXNH Variable Lead, Four Flutes, High Helix, Roughing Type
  • without Coolant Hole φ10～φ25
  • with Coolant Hole φ12～φ25
PXNL Variable Lead, Four Flutes, Low Helix, Roughing Type
  • without Coolant Hole φ10～φ25
  • with Coolant Hole φ12～φ25
PXRE Straight Flutes, Corner Radius Type
  • without Coolant Hole φ10～φ20
PXDR-P Three Flutes, Multi-purpose, Corner Radius Type
  • without Coolant Hole φ10～φ20
PXDR-N Three Flutes, Heavy-duty, Corner Radius Type
  • without Coolant Hole φ10～φ20
PXBE-P 3枚刃 Three Flutes, Multi-purpose, Ball Type
  • without Coolant Hole φ10～φ20
  • with Coolant Hole φ12～φ20
PXBE-N 3枚刃 Three Flutes, Heavy-duty, Ball Type
  • without Coolant Hole φ10～φ20
  • with Coolant Hole φ12～φ20
PXBM Multiple Flutes, Ball Type
  • without Coolant Hole φ12～φ20
Body
  • Straight Shank Holder for PXM（PXMZ）　Carbide・Steel Shank
  • Straight Shank Holder for PXM（PXMZ）　Carbide・Steel Shank with Coolant Hole
  • Joint for PXM（PXMJ）
  • Joint for PXM（PXMJ） with Coolant Hole
  • Collet for PXM（PXMC）
 Data
1.6 times durability and 1/5 of tooling cost achieved in parts machining

Related products