Mitutoyo

ABS Digimatic Indicator ID-C-Peak-Value Hold Type

  • The new Peak Hold-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
  • Parameter setting software makes it even eay to set all available parameters.
  • An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values.
  • The maximum, minimum or runout value can be displayed during measurement.
  • Go/no-go judgment is performed by setting the upper and lower tolerances for max., min. and runout values.
  • High speed sampling ratio of 50 times/s.
  • Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle Absolute Position from the origin when turned on.

Technical Data
Resolution: 0.001-0.01mm or .00005-.0005”/ 0.001-0.01mm Display: LCD
Length standard: ABSOLUTE electrostatic capacitance-type linear encoder
Max. response speed: Unlimited
Measuring force: 1.5N or less
Battery: CR2032 (1 pc.), 05SAA217
Battery life: Approx. 12 months under normal use
IP Rating: Equivalent to IP-42*1
*1 A protection class indication (IP=lnternational Protection) is based on the IEC 60529 /DIN40050 part 1/JIS D0207, C0920. The level indicated is valid only if the output connector cap is installed.

ENQUIRY

Lorem Lorem ipsum dolor sit amet, conse ctetur adipiscing elit, sed do eiusmod tempor incididunt ut labore

Product Name : ABS Digimatic Indicator ID-C-Peak-Value Hold Type