The Hydraulic Chuck supports high-precision drilling and reaming on CNC automatic lathes. Easy to change tools even inside a machine with limited space, using a single wrench.
Integrated design provides high durability and easy maintenance.
Also the rigidity is greatly improved by the short overhang and dual pressure points.
Repeatability within 1μm at 4D
High precision repeatability less than 1μm at 4d improves the tool life.
The cutting tool can be clamped or unclamped easily and securely with just one wrench.
No change in tool length
Since the projection length of the cutting tool does not change before and after tightening the clamp screw, it is easy to adjust the length on the machine.
Front-side Clamping Type
CLAMPING RANGE : ø3-12mm
High-precision cutting with hydraulic chuck is achieved on an automatic lathe.
STANDARD TYPE
● Most popular design available for various tool posts.
● Rc(PT)1/8 piping thread preparation for coolant through tool.
● Adjusting Screw can be used with some models.
Back-side Clamping Type
CLAMPING RANGE : ø3-10mm
Single wrench enables easy cutting tool change on the tool post. User-friendly rear clamping design is ideal for front tool post
F Type
● Tighten from the opposite side of the tool.
● Rc(PT)1/8 piping thread preparation for coolant through tool.
● Slim design avoids interference with adjacent tools.
● Optimum overall length for easy use •Ideal for use on a front tool post.
Rear-post Type
CLAMPING RANGE : ø3-10mm
Unique block design enables easy handling for both upper or lower tool post position. Oil hole drills can be used for coolant delivery with M6.
R TYPE
● Unique design for use with both upper and lower sections without interference.
● Tool change with a single wrench avoiding adjacent tools and coolant pipes.
● Easy tool setup even at the lower tool post.
● Tightening at an offset position in the tool side.
● M6 piping thread preparation for coolant through tool available in upper tool post.
