| Application | linear gauge | Display Method | Digital |
|---|---|---|---|
| Scale interval minimal display(mm) | 0.0005 | Accuracy(μm) | 1 μm or less |
| Measured force(N) | 1.08 N or less | Standard specification (measuring element) | F-201 (Ceramic) |
| Standard specification (cable) | Cable Length: 2 m | Standard specification (rubber bellows) | M-138 |
| Features | Protection Grade: Equivalent to IP67 | Measurement Range(mm) | 5 |
| Mass(g) | 110 | – | – |
Citizen
Digital Dial Gauge Displacement Sensors (DIGIMETRON)
Features
- An ultra-small box type optimal for embedding into equipment.
- Equipped with origin detection function, it does not require master setting each time the power is turned off.
- The lower surface installation method eliminates issues caused by excessive tightening of the stem.
- A unit that has protection grade of IP67 and complies with the EMC Directive (CE marking).
| Model | DG-105B | |
|---|---|---|
| Range | 10mm | |
| Resolution | 5 µm | |
| Accuracy | 5 µm or less | |
| Measuring force | 1.18N or less | |
| Response speed*1 | 1000mm/sec | |
| IP protection level | – | |
| Origin position | – | |
| Weight | Approx. 190g | |
| Cable length | 2m | |
| Standard attachments | Contact point *2 | F-201 |
| Rubber bellows | M-132 | |
Non-standard specifications (model, measuring force, etc.) are available upon request.
*1 This is the maximum spindle speed at which normal signals can be output.
*2 Various other contact points are available.
| Optionalextension cable | Length | 2m | 3m | 5m | 10m |
|---|---|---|---|---|---|
| Model | SDA-2340-(1)2M | SDA-2340-(2)3M | SDA-2340-(4)5M | SDA-2340-(6)10M |
