ABS-Digimatic-Indicator-ID-C-Standard-Type-02
Mitutoyo

ABS Digimatic Indicator ID-C-Standard Type

  • Similar in size to Series 2 dial indicators.
  • As compact as standard Series 2 dial indicators.
  • Large, easy-to-read LCD.
  • GO/±NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/±NG) can be displayed in full-size characters.
  • The positive/negative count resulting from the spindle’s up/down movement can be toggled.
  • Internal calculations using the simple formula of [F(x)=Ax)] are available
  • Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle “Absolute Position” from the origin at power-on. Also unlimited response speed eliminates over-speed errors.
  • The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading.
  • With SPC data output.
Download Catalogue
Categories: ,
ABSOLUTE Digimatic Indicator ID-C Series 543-Standard Type

Function

  • Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, Power ON/OFF, Data output,inch/mm conversion (on inch/metric models only)
  • Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error
  • Internal calculations using the simple formula of [F(x)=Ax)] are available

Optional Accessories

  • 905338: SPC cable (40” / 1m)
  • 905409: SPC cable (80” / 2m)
  • 21EZA198: Spindle lifting lever (ISO/JIS type)*
  • 21EZA199: Spindle lifting lever (ANSI/AGD type)*
  • 21EZA105: Spindle lifting knob(12.7mm/5″ISO/JIS type)**
  • 21EZA150:Spindle lifting knob(12.7mm/5″ ANSI/AGD type)**
  • 21EZA197:Spindle lifting knob(25.4mm/1″,50.8/2″ models)
  • 21EZA200:Spindle lifting knob(50.8mm/2″)
  • 540774: Spindle lifting cable (stroke: 1”/25.4mm)
  • 02ACA571: Auxiliary spindle spring for 25mm/1” models***
  • 02ACA773: Auxiliary spindle spring for 50mm/2” models***
    *Can be used on 12mm/.5” models only.
    **Not available for low measuring force models.
  • Accuracy: Refer to the list of specifications.
  • Resolution: 0.01mm, 0.001mm, .0005″/0.01mm, .0001”/0.001mm or .00005”/0.001mm
  • Display: LCD
  • Length standard: ABSOLUTE electrostatic capacitance type linear encoder
  • Max. Response speed: Unlimited
  • Measuring force: Refer to the list of specifications
  • Battery: SR44 (1 pc.), 938882
  • Battery life: Approx. 5,000 hours under normal use
  • Dust/Water protection level: IP42 or IP53 (dust-proof type)

ABS Digimatic Indicator ID-C-Standard Type

Inch/Metric

Order No Model Range Accuracy Contact Point Measuring Force Resolution *Switchable Type Remarks
543-391 ID-C112MX .5in/ 12.7mm .0001in Stem Ø 8mm
M2.5×0.45 Thread		 Less than
1.5N		 *.00005in 0.001mm ISO/JIS –
543-391B ID-C112MX .5in/ 12.7mm .0001in Stem Ø 8mm
M2.5×0.45 Thread		 Less than
1.5N		 *.00005in 0.001mm ISO/JIS –
543-392 ID-C112EXB .5in/ 12.7mm .0001in Stem dia3/8″,#4-48 UNF Thread Less than
1.5N		 *.00005in 0.001mm
ISO/JIS
 –
543-392B ID-C112EXB .5in/ 12.7mm .0001in Stem dia3/8″,#4-48 UNF Thread Less than
1.5N		 .00005in 0.001mm
ISO/JIS
 –
543-395 ID-C112CMX .5in/ 12.7mm .0001in Stem ø8mm M2.5×0.45 Thread Less than
0.4-0.7N		 *.00005in 0.001mm
ISO/JIS
 Low measuring force
543-395B ID-C112CMX .5in/ 12.7mm .0001in Stem ø8mm M2.5×0.45 Thread Less than
0.4-0.7N		 .00005in 0.001mm
ISO/JIS
 Low measuring force
543-396 ID-C112CEX .5in/ 12.7mm .0001in Stem dia 3 8 in
4-48 UNF Thread		 Less than
0.4, 0.6, 0.7N		 *.00005in 0.001mm ANSI/AGD Low measuring force
543-396B ID-C112CEX .5in/ 12.7mm .0001in Stem dia 3 8 in
4-48 UNF Thread		 Less than
0.4, 0.6, 0.7N		 *.00005in 0.001mm ANSI/AGD Low measuring force
543-401 ID-C1012MX .5in/ 12.7mm .001in Stem Ø 8mm
M2.5×0.45 Thread		 Less than
0.9N		 .0005in 0.01mm ISO/JIS –
543-401B ID-C1012MX .5in/ 12.7mm .001in Stem Ø 8mm
M2.5×0.45 Thread		 Less than
0.9N		 .0005in 0.01mm ISO/JIS –
543-402 ID-C1012EX .5in/ 12.7mm .001in Stem dia 3 8 in
4-48 UNF Thread		 Less than
0.9N		 .0005in 0.01mm ANSI/AGD –
543-402B ID-C1012EX .5in/ 12.7mm .001in Stem dia 3 8 in
4-48 UNF Thread		 Less than
0.9N		 .0005in 0.01mm ANSI/AGD –
543-405 ID-C1012CMX .5in/ 12.7mm .001in Stem ø8mm M2.5×0.45 Thread Less than
0.2-0.5N		 .0005in 0.01mm
ISO/JIS
 Low measuring force
543-405B ID-C1012CMX .5in/ 12.7mm .001in Stem ø8mm M2.5×0.45 Thread Less than
0.2-0.5N		 .0005in 0.01mm
ISO/JIS
 Low measuring force
543-406 ID-C1012CEX .5in/ 12.7mm .001in Stem dia 3 8 in
4-48 UNF Thread		 Less than
0.2, 0.3, 0.4, 0.5N		 .0005in 0.01mm ANSI/AGD Low measuring force
543-406B ID-C1012CEX .5in/ 12.7mm .001in Stem dia 3 8 in
4-48 UNF Thread		 Less than
0.2, 0.3, 0.4, 0.5N		 .0005in 0.01mm ANSI/AGD Low measuring force
543-471B ID-C125MXB 1in/ 25.4mm 0.00012in Stem ø8mm M2.5×0.45 Thread Less than
1.8N		 *.00005in 0.001mm
ISO/JIS
 –
543-472B ID-C125EXB 1in/ 25mm .0001in Stem dia 3 8 in
4-48 UNF Thread		 Less than
1.8N		 *.00005in 0.001mm ANSI/AGD –
543-475B ID-C1025MXB 1in/ 25.4mm .001in Stem ø8mm M2.5×0.45 Thread Less than
1.8N		 .0005in 0.01mm
ISO/JIS
 –
543-476B ID-C1025EXB 1in/ 25mm .001in Stem dia 3 8 in
4-48 UNF Thread		 Less than
1.8N		 .0005in 0.01mm ANSI/AGD –
543-491B ID-C150MXB 2in/ 50.8mm 0.00025in Stem ø8mm M2.5×0.45 Thread Less than
2.3N		 *.00005in 0.001mm
ISO/JIS
 –
543-492B ID-C150EXB 2in/ 50mm .0002in Stem dia 3 8 in
4-48 UNF Thread		 Less than
2.3N		 *.00005in 0.001mm ANSI/AGD –
543-495B ID-C1050MXB 2in/ 50.8mm .0016in Stem ø8mm M2.5×0.45 Thread Less than
2.3N		 .0005in 0.01mm
ISO/JIS
 –
543-496B ID-C112CEXB 2in/ 50mm .0016in Stem dia 3 8 in
4-48 UNF Thread		 Less than
2.3N		 .0005in 0.01mm ANSI/AGD –

Related products