KC KABUTO CENTER – GENERAL LATHE

Regular model for general lathe.
The replacement head enables cost reduction.

Categories: ,

  • See Technical Specifications (HEAD LIST) for center head types.
  • See Technical Specifications  (ALLOWABLE LOAD & MORSE TAPAR) for revolutions per minute.
  • Type KC is not waterproof.
  • Type KC comes with the center head A and then the center head ejecting drift DHN-1
    (KC-5 come with the center head 5A60° and DHN-2).
DIMENSIONS TABLE (UNIT mm)
MODEL TYPE M.T. φD φd φh A B C E F L HEAD TYPE WEIGHT (g) HEAD ANGLE
KC-2 No.2 35 27 15.5 36.2 32 68 4 22.5 136.2 REPLACEMENT 510 60°
KC-3 No.3 40 30 16 36.2 37.5 85 4.5 22.5 158.7 REPLACEMENT 780 60°
KC-4 No.4 49.5 32 16 36.2 47 108 5.3 22.5 191.2 REPLACEMENT 1,400 60°
KC-5 No.5 68 52 26 60.5 57 136 6.3 38 253.5 REPLACEMENT 3,600 60°

 

DIMENSIONS TABLE (UNIT mm)
MODEL TYPE M.T. φD φd A B C E L HEAD TYPE WEIGHT (g) HEAD ANGLE
KC-1 No.1 23.5 16 18.5 23.5 57 3.5 99 INTEGRAL 160 60°

*Dimensions are subject to change for alteration without prior notice.

 

  • Type KC-6 comes with the center head 6A60° and then the center head ejecting drift DHN-2.
DIMENSIONS TABLE (UNIT mm)
MODEL TYPE M.T. φD φd φh A B C E F L HEAD TYPE WEIGHT (g)
KC-6 No.6 125 65 33 70.5 87 189 8 44 346.5 REPLACEMENT 15,000
  • Only KC-6 is waterproof and dust proof with taper roller bearing. (With nut is available so please contact us for details.)

*Dimensions are subject to change for alteration without prior notice.

 

 

  • Head angles available are: 60°, 75° and 90°.
DIMENSIONS TABLE (UNIT mm)
MODEL TYPE M.T. φD φd φh A B C E L HEAD TYPE WEIGHT (g) HEAD ANGLE
KC-6 No.6 125 65 31 70.5 87 189 8 346.5 INTEGRAL 15,000 60°
No.6 125 65 31 57 87 189 8 333 INTEGRAL 15,000 75°
No.6 125 65 31 48 87 189 8 324 INTEGRAL 15,000 90°
  • Only KC-6 is waterproof and dust proof with taper roller bearing.
    (With nut is available so please contact us for details.)

*Dimensions are subject to change for alteration without prior notice.

HEAD LIST

HEAD LIST

 

LOAD CAPACITY & MORSE TAPAR TABLE

ASSUME BEARING LIFE OF 2000 HOURS   (UNIT kgf)

KFL & KFN

KFL
KFN
 MORSE TAPER LOAD / rpm 500 1,000 2,000 3,000 4,000 5,000 6,000 7,000
M.T.-3 RADIAL 330 238 192 161 146 137 129 96
THRUST 196 140 113 95 86 81 75 60
M.T.-4 RADIAL 527 419 332 290 264 244 230 172
THRUST 300 238 189 165 150 139 130 104
M.T.-5 RADIAL 705 577 454 409 360 325 306 230
THRUST 470 385 303 273 240 217 204 153

KS & KSN

KS
KSN
 MORSE TAPER LOAD / rpm 500 1,000 2,000 3,000 4,000 5,000
M.T.-2 RADIAL 168 135 107 93 84 78
THRUST 221 177 140 122 111 104
M.T.-3 RADIAL 237 190 151 132 120 110
THRUST 312 250 198 173 157 145
M.T.-4 RADIAL 425 340 268 235 213 198
THRUST 556 445 353 308 280 260
M.T.-5 RADIAL 630 504 400 349 317 294
THRUST 780 662 525 460 417 387

KC & KCW

KC
KCW
 MORSE TAPER LOAD / rpm 50 150 500 1,000 2,000 3,000
M.T.-1 RADIAL 53 29 24 20 16 12
THRUST 55 37 29 23 20 15
M.T.-2 RADIAL 212 115 95 77 61 48
THRUST 282 189 148 112 97 77
M.T.-3 RADIAL 340 200 160 125 108 86
THRUST 430 298 237 191 155 124
M.T.-4 RADIAL 643 380 302 231 206 164
THRUST 665 445 352 280 245 194
M.T.-5 RADIAL 910 605 485 385 308 –
THRUST 1065 713 564 450 360 –
M.T.-6 RADIAL 2800 2100 1380 1170 – –
THRUST 3750 2770 1850 1470 – –

【NOTES】 Load capacity is a value that shows the lifetime limitation of the bearing, and is therefore not a value for the center itself.

 

MORSE TAPER TABLE

MORSE TAPER GAUGE LINE ONE-SIDED TAPER ANGLE TAPER RATIO
No.1 Ø 12.065 1° 25′ 43″ 0.049882
No.2 Ø 17.780 1° 25′ 50″ 0.049951
No.3 Ø 23.825 1° 26′ 16″ 0.050196
No.4 Ø 31.267 1° 29′ 15″ 0.051938
No.5 Ø 44.399 1° 30′ 26″ 0.052626
No.6 Ø 63.348 1° 29′ 36″ 0.052138

 

 

Related products